top of page

/

Amateur

/

IC-7100 (All Mode)

/

All Mode Amateur

All Mode Amateur

HF/VHF/UHF ALL MODE TRANSCEIVER

IC-7100 (All Mode)

Intuitive Touch Screen, Quick Response,
Multi-band Radio

Multi-band, All Mode Operation at Your Fingertips!

Icom changed the way hams think about mobile HC communication in 1995 with the introduction of the IC-706. Since then, the Icom Mobile HF radios have been the Performance HF mobile radio of choice. At the 2012 Tokyo Hamfair, Icom once again changed mobile HF communications by introducing the IC-7100. The ease of operation with fingertip control utilizing the intuitive touch screen interface with the power of 32-bit IF DSP.

Specification

General

Frequency coverage*1

Receiver:

0.030–199.999MHz*2

400.000–470.000MHz*2


Transmit

1.800–1.999MHz

3.500–3.999MHz

5.255–5.405MHz*2

7.000–7.300MHz

10.100–10.150MHz

14.000–14.350MHz

18.068–18.168MHz

21.000–21.450MHz

24.890–24.990MHz

28.000–29.700MHz

50.000–54.000MHz

144.000–148.000MHz

430.000–450.000MHz

Mode

USB, LSB, CW, RTTY, AM, DV, FM,

WFM(Rx only)


No of memory channels

495 regular, 4 call, 6 scan edges,

900 D-STAR repeater channels


Antenna connector

SO-239×2

(one each for HF/50MHz and 144/430/440MHz, 50Ω)


Operating Temp. range

−10°C to +60°C;

+14°F to +140°F


Frequency stability

±0.5ppm

(0°C to +50°C @ 430MHz)


Power supply requirement

13.8V DC ±15%


Current drain

(at 13.8V DC)

Tx

22A (HF/50MHz)

16A (144/440MHz)


RX

1.2A/0.9A (Max. audio/standby)

Dimensions

(W×H×D,

projections not included)

Main unit


 

167×58×225 mm;

6.57×2.28×8.86 in


Controller

165×64×78.5 mm;

6.5×2.52×3.09 in

Weight

(approx.)

Main unit

2.3 kg; 5.1 lb


Controller

0.5 kg; 1.1 lb

*1 Showing the USA version. Varies depending on the version.

*2 Some frequency bands are not guaranteed.


Transmitter

Output power


(at 13.8V DC)

SSB/CW/RTTY/FM/DV


 

HF/50MHz: 2–100W


144MHz: 2–50W


430/440MHz: 2–35W


AM

HF/50MHz: 1–30W

Modulation system

SSB

Digital P.S.N. modulation


AM

Digital low power modulation


FM

Digital phase modulation


DV

GMSK digital phase modulation

Spurious emissions

Less than −50dB (HF bands)


Less than −63dB (50MHz)


Less than −60dB (144/430/440MHz)


Carrier suppression

More than 50dB


Unwanted sideband

More than 50dB



Receiver

Intermediate frequencies

SSB/CW/AM/FM/RTTY/DV:

124.487MHz, 455kHz, 36kHz


WFM

134.732MHz, 10.700MHz

Sensitivity

(HF: Preamp-1 ON, 50MHz: Preamp-2 ON,

144/430/440MHz: Preamp ON)

SSB/CW (BW=2.4kHz at 10dB S/N)

1.8–29.9MHz: 0.15μV

50–54MHz: 0.12μV

144/430/440MHz: 0.11μV


AM (BW=6kHz at 10dB S/N)

0.5–1.8MHz: 13μV

1.8–29.9MHz: 2μV

50–54MHz: 1μV

144/430/440MHz: 1μV


FM (BW=15kHz at 12dB SINAD)

28–29.7MHz: 0.5μV

50–54MHz: 0.25μV

144/430/440MHz: 0.18μV


DV (at 1% BER)

28–29.7MHz: 1μV

50–54MHz: 0.63μV

144/430/440MHz: 0.35μV


WFM (at 12dB SINAD):

76–108MHz: 10μV

Selectivity

SSB (BW=2.4kHz, sharp)


 

More than 2.4kHz / −6dB

Less than 3.4kHz / −40dB


CW (BW=500Hz, sharp)

More than 500Hz / −6dB

Less than 700Hz / −40dB


RTTY (BW=500Hz)

More than 500Hz / −6dB

Less than 800Hz / −40dB


AM (BW=6kHz)

More than 6.0kHz / −6dB

Less than 10kHz / −40dB


FM (BW=15kHz)

More than 12kHz / −6dB

Less than 22kHz / −40dB


DV (12.5kHz spacing)

More than −50dB

Spurious and image rejection ratio

More than 70dB (HF/50MHz)

More than 65dB (144/430/440MHz)

(except 1/2 IF through on 50MHz,

IF through on 144MHz)


Audio output power

More than 2.0W

(10% distortion, 8Ω load, 13.8V DC)


All stated specifications are subject to change without notice or obligation.


Supplied Accessories

  • Hand microphone, HM-198

  • DC power cable

  • CW keyer plug

  • Spare fuses

  • Separation cable, OPC-2253

  • 13-pin plug ACC cable

  • USB cable

  • Ferrite bead*

* May differ depending on the version

bottom of page