/
Aviation
/
IC-A120
/
Mobile Aviation
Mobile Aviation
VHF AIR BAND TRANSCEIVER
IC-A120
Top Performance Mobile Airband Radio with Active Noise Cancelling and Bluetooth® Wireless Connectivity
VHF Air Band Mobile Radio
Icom’s A120 air band mobile introduces two new features: Active Noise Cancelling (ANC) and Bluetooth® capabilities. The newly added built-in ANC reduces background noise and is effective in extremely noisy airport environments. The automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition. Insert the optional UT-133A Bluetooth® unit and connect a third-party wireless Bluetooth® headset. This unit is great for any mobile application, and it’s available in a base station. Both are built to mil-spec for superb reliability!
Specification
General
Frequency range (TX/RX) | 118.000–136.992 MHz | |
Channel spacing | 25 kHz/8.33 kHz | |
Type of emission | 6K00A3E, 5K60A3E (FCC/EXP) 6K00A3E (Industry Canada) | |
Operating temperature range | –30˚C to +60˚C; –22˚F to +140˚F | |
Frequency stability | ±5 ppm (–30˚C to +60˚C) | |
Antenna connector | SO-239 (50 Ω) | |
Number of memory channels | 200 channels | |
Power supply requirements | 13.75 V/27.5 V DC | |
Current drain (at 13.75 V) | TX | 5.0 A (maximum) |
RX | Stand-by | 0.5 A |
Max. audio | 4.0 A | |
Dimensions (W×H×D) (Projections are not included) | 161×45×175 (mm) 6.34×1.77×6.89 (in) (approximately) | |
Weight (approximately) | 1.5 kg; 3.3 lb (main unit) |
Transmitter
Output power (at 13.75 V) (Carrier Power) | 9.0 W typical 10.0 W maximum |
Spurious emissions | Less than –60 dBc |
Modulation | 70% to 100% |
Microphone impedance | 600 Ω |
Receiver
Intermediate frequencies | 38.85 MHz/450 kHz (1st/2nd) | |
Sensitivity (at 6 dB S/N) | Less than 1 μV | |
Selectivity | 8.33 kHz | 2.778/7.37 kHz (6 dB/60 dB) |
25 kHz | 8/25 kHz (6 dB/60 dB) | |
Spurious response rejection | More than 74 dBμ | |
Audio output power (at 10% distortion, 60% modulation) | Internal SP (8 Ω load) | 1.5 W typical |
External SP (8 Ω load) | More than 10 W | |
Headphone (500 Ω load) | More than 100 mW |
Measurements made in accordance with FCC Part 87 and Industry Canada for USA version. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard
| MIL-810 G | |
Method | Procedure | |
Low Pressure | 500.5 | I, II |
High Temperature | 501.5 | I, II |
Low Temperature | 502.5 | I, II |
Temperature Shock | 503.5 | I-C |
Solar Radiation | 505.5 | I |
Humidity | 507.5 | II |
Vibration | 514.6 | I |
Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
Applicable IP Rating
Ingress Protection Standard | |
Dust & Water | IP54 (Dust-protection and water resistance) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
Hand microphone, HM-216
DC power cable
Mounting bracket kit
Microphone hanger kit
Fuses