/
Aviation
/
IC-A220
TSO version
/
Panel Mount Aviation
Panel Mount Aviation
VHF AIR BAND TRANSCEIVER
IC-A220
TSO version
Easy to Install Panel Mount Airband with
High-Quality Panel Mount Radio
with Clear Visibility OLED Screen
High Visibility OLED Screen
The OLED (Organic Light Emitting Diode) emits light from itself, so a display backlight is not required. It provides higher contrast, wider viewing angle of almost 180 degrees and faster response time than a conventional LCD. The IC-A220’s display has a wide active area, operating frequencies’ characters can be maximized in the display, while operating status can be shown on both top and bottom of the display.
Large Switch Buttons
The IC-A220 has large switch buttons on the front panel. The most frequently used FLIP-FLOP (Frequency exchange) switch button is designed large enough to be pushed with ease. All switch buttons and knobs are illuminated with pure-white backlighting which are the same color as the OLED display.
TSO/ETSO Certification
The IC-A220 TSO version can be used as a primary VHF radio in general aviation (part 23) aircraft*. The IC-A220 TSO version is also accepted as an ETSO radio under the TSO/ETSO reciprocal acceptance policy.
Specification
General
Frequency coverage | TX/RX | 8.33 kHz spacing | 118.000–136.992 MHz |
25 kHz spacing | 118.000–136.975 MHz | ||
RX | Weather channel | 161.650–163.275 MHz | |
Frequency spacing | 8.33 kHz / 25 kHz | ||
Mode | AM (6K00A3E, 5K60A3E) | ||
Frequency stability | ±5 ppm | ||
Operating temperature range | –20°C to +55°C; –4˚F to +131˚F | ||
Antenna impedance | 50 Ω | ||
Number of memory channels | 20 regular, 50 group memory, 20 history, 10 weather channels | ||
Power supply requirements | 13.8V/27.5V DC (Negative ground) | ||
Dimensions (W×H×D) (Projections are not included) | 160×34×271 mm 6.3×1.34×10.67 in | ||
Weight | 1.2 kg; 2.65 lb ±10% | ||
Certification | TSO-C128a, TSO-C169a |
Transmitter
Output power | 8 W (Carrier power) |
Spurious emission | –60 dBc |
Modulation limiting | 70% (Maximum 98%) |
Microphone impedance | 600Ω |
Receiver
Intermediate frequencies | 38.85 MHz/450 kHz (1st/2nd) | |
Sensitivity | AM (6 dB S/N) | Less than 2μV |
FM (12 dB SINAD) | Less than 1.4μV | |
Selectivity | 25 kHz spacing | ±3 kHz/±22 kHz (6 dB/60 dB) |
8.33 kHz spacing | ±2.778 kHz/±7.37 kHz (6 dB/60 dB) | |
Spurious response rejection | More than 74 dBμ | |
Audio output power | External SP | 5 W with a 4 Ω load |
Headphone | 60 mW with a 500 Ω load |
Applicable U.S. Military Specifications
Standard
| MIL-810 G | MIL-810 G |
Method | Procedure | |
Low Pressure | 500.5 | I,II |
High Temperature | 501.5 | I,II |
Low Temperature | 502.5 | I,II |
Temperature Shock | 503.5 | I-C |
Solar Radiation | 505.5 | I |
Humidity | 507.5 | II |
Vibration | 514.6 | I |
Shock | 516.6 | I |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
Supplied Accessories
Mounting bracket kit
Measurements made in accordance with RTCA DO-186B for USA version.The IC-A220 TSO version is manufactured and serviced by Icom America Inc.All repairs or adjustment information will be provided from Icom America.