/
Amateur
/
IC-V86/IC-U86 (Analog Radios)
/
Analog Radios Amateur
Analog Radios Amateur
VHF/UHF DIGITAL TRANSRECEIVER
IC-V86/IC-U86 (Analog Radios)
7 W Output Power and 1500 mW Audio
2M with Powerful Audio
The IC-V86 gives you more audio, more RF power, more coverage, and more battery capacity in a compact, MIL-STD portable. With 1.5W of receive audio power and a new chassis design, the IC-V86 enables users to hear incoming signals in loud, noisy environments. The IC-V86 expands users' radios coverage with 7W of RF output power, and the new 2250mAh Li-Ion battery pack provides longer operational capabilities.
Specification
General
IC-V86 | IC-U86 | ||
Frequency range (TX/RX guaranteed range) | TX: 144–148 MHzRX: 136–174 MHz | TX: 430–450 MHzRX: 400–472 MHz | |
Type of emissions | F2D, F3E (FM, FM-N) | ||
Number of channels | 207 channels (200 memory channels, 1 call channel and 6 scan edges) | ||
Antenna impedance | 50Ω | ||
Power supply requirement | 7.5V DC | ||
Operating temperature range | –20 ˚C to +60 ˚C, –4 °F to +140 °F | ||
Frequency stability | ±2.5ppm ( –20 ˚C to +60 ˚C, –4 °F to +140 °F) | ||
Current drain (For the transceiver with a "U" mark on the serial number label) | TX (EX Hi/Hi/Mid/Low) | 1.6/1.4/1.0/0.5 A typical | EXP1: 1.6/1.5/1.0/0.5 A typ. EXP2: 1.6/1.4/0.9/0.5 A typ. |
RX (Max. audio) | 450 mA typ. (INT SP),190 mA typ. (EXT SP, Single end)450 mA typ. (EXT SP, BTL) | 450 mA typ. (INT SP),190 mA typ. (EXT SP, Single end)450 mA typ. (EXT SP, BTL) | |
Dimensions (W×H×D) (Projections not included) | 58.6 × 112 × 30.5 mm,2.3 × 4.4 × 1.2 in(with BP-298) | ||
Weight (Approximate) | 300 g, 10.6 oz(with BP-298, FA-B57V) | 290 g, 10.2 oz(with BP-298, FA-B57U) |
Transmitter
IC-V86 | IC-U86 | |
Output power (EX Hi/Hi/Mid/Low) | 7.0/5.5/2.5/0.5 W | 5.5/4/2/0.5 W |
Maximum frequency deviation | ±5.0 kHz/±2.5 kHz (Wide/Narrow) | ±5.0 kHz/±2.5 kHz (Wide/Narrow) |
Spurious emissions | Less than –60 dB | Less than –60 dB |
External microphone connector | 3-conductor 2.5 (d) mm (1/10")/2.2 kΩ | 3-conductor 2.5 (d) mm (1/10")/2.2 kΩ |
Receiver
IC-V86 | IC-U86 | |
Sensitivity | –124 dBm typical | EXP1: –121 dBm typicalEXP2: –123 dBm typical |
Squelch sensitivity | –126 dBm typical | EXP1: –123 dBm typicalEXP2: –125 dBm typical |
Selectivity (Wide/Narrow) | 75 dB typical/70 dB typical | 70 dB typical/68 dB typical |
Intermodulation | 65 dB typical | |
Audio output power (For the transceiver with a "U" mark on the serial number label) | Internal SP | 1500 mW typical (with 8 Ω load) |
External SP | 450 mW typical (single end)1500 mW typical (BTL, HM-222HLWP connected) | |
External speaker connector | 3-conductor 3.5(d)mm (1/8″)/8Ω |
Applicable U.S. Military Specifications
Standard
| MIL-810 G | MIL-810 G |
Method | Procedure | |
Low Pressure | 500.5 | I, II |
High Temperature | 501.5 | I, II |
Low Temperature | 502.5 | I, II |
Temperature Shock | 503.5 | I-C |
Solar Radiation | 505.5 | I |
Rain Blowing/Drip | 506.5 | I, III |
Humidity | 507.5 | II |
Salt Fog | 509.5 | – |
Dust Blowing | 510.5 | I |
Vibration | 514.6 | I |
Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
Ingress Protection Standard | |
Dust and Water | IP54 (Dust-protection, water resistance) |
All stated specifications are subject to change without notice or obligation
Supplied Accessories
BP-298/BP-264, battery pack*
BC-240, Desktop charger
BC-242, AC adapter
MB-124, belt clip
Antenna*
* May differ, depending on transceiver version